Aerospace Mechanism Testing (AMT) laboratory aims to cultivate high-level research talents and carry out academic research and engineering implementation centering on the special needs of in-orbit and ground testing of aerospace mechanism. The Laboratory is located in the Technology Innovation Building (TIB) of HIT. The staff includes faculty, doctoral student, master student, undergraduate, engineer and research secretary. Our research interests include Asteroid Anchoring and Sampling, Extraterrestrial Aerial Vehicle, Ultrasonic Drive and Control, Precise Torque Simulating and Testing.
ID: NEWS2023-No.6 Time: August 8, 2023 Place: Harbin, China Event: On July 26, 2023, Ms. Yajun Wu who graduated in 2018, with her parents visit the AMT laboratory. Ph.D. candidate Mr. Bo Tang introduces the development of research about the Mars rotorcraft and asteroid exploration to them. Ms. Yajun Wu also shares her working experience after graduation and discusses freely the current employment situation in Mainland and abroad with Prof. Qiquan Quan. This article is […]
ID: NEWS2023-No.5 Time: August 1, 2023 Place: Nanchang and Wuhu, China Event: During the period from July 30th to August 1st, 2023, Prof. Qiquan Quan, Mr. Zhijun Yu, Mr. Kaijie Zhu, and Mr. Bo Tang conduct technical discussion at Jiangxi MAD Components Co., Ltd. in Nanchang and Anhui Xoar Aero Tech Ltd. in Wuhu. A technical seminar on motor light weighting is conducted at MAD, while a discussion on blade light weighting, dynamic balancing testing, […]
ID: NEWS2023-No.4 Time: June 23, 2023 Place: Harbin, China Event: On June 19, 2023, GDU technical experts Mr. Yuan Xue and Mr. Shuai Song are invited by Prof. Qiquan Quan to participate in a workshop on data flow and communication protocols of UAV in Harbin. The workshop is held at the Volga Manor, Harbin. Mr. Yuan Xue and Mr. Shuai Song have a deep technical exchange with Prof. Qiquan Quan, Prof. Peng Liu, Prof. Rui […]
ID: NEWS2023-No.3 Time: June 22, 2023 Place: Harbin, China Event: On May 31, Yachao Dong, Hao Cai, Yuanxu Wu, Kaiyi Wang, Ming Lu, Yang Xu, Yuheng Wang, Lanchen Kou, the master students of Aerospace Mechanism Testing Laboratory (AMT), worked hard and managed to pass their thesis defenses. Among them, the dissertation of Yachao Dong won the award of “Excellent Master Degree Dissertation of Harbin Institude of Technology”. AMT held a photo shoot for everyone. Teachers […]
ID: NEWS2023-No.1 Time: February 19, 2023 Place: Harbin, China Event: On February 19, 2023, Mr. Zezhou Sun, the designer-in-chief of Tianwen-1, Mr. Zhencai Li, the deputy commander, and Mr. Dong Pan, the designer, come to visit the Research Center of Aerospace Mechanism and Control at Harbin Institute of Technology. Mr. Sun shares the arduous process and plans of the Tianwen-1 Mars mission. On behalf of the research team, Dr. Quan puts forward some assumptions on […]
ID: NEWS2022-No.13 Time: December 31, 2022 Place: Harbin Event: The AMT Laboratory held an online year-end party at 2:00 pm on December 31. Yuheng Wang and Yuanxu Wu hosted the party. Kaijie Zhu read AMT’s 2022 annual report. In the “2022 Photography Contest”, teachers, students, engineers, and the research assistant voted online and selected excellent photographs: Bo Tang won both the Gold Medal and Bronze Medal, and Mengxue Li won the Silver Medal. Under the […]
ID: NEWS2022-No.12 Time: December 13, 2022 Place: Harbin, China Event: The Mars atmosphere simulator is a significant experimental setup for testing rotor performance in the simulated atmosphere of Mars. To improve the recovery speed of air pressure inside the tank after the experiment is completed, a larger size air inlet valve is replaced outside the tank, thus reducing the air pressure recovery time to less than 80 minutes. To solve a potential safety hazard that the […]
ID: NEWS2022-No.11 Time: November 17, 2022 Place: Harbin, China Event: MarsBird-IV is one of the serialized Mars rotorcraft prototypes developed by AMT laboratory. MarsBird-IV employs a parallel swashplate mechanism to realize its attitude control. At present, the prototype is developed and the test of the swashplate attitude adjusting motors is preliminarily completed. A FPGA control circuit drives the servos under the control of an xPC target computer and receives the commands with a delay in the […]
ID: NEWS2022-No.10 Time: November 09, 2022 Place: Harbin, China Event: Rapid Control Prototyping (RCP) is a kind of model-based algorithm design and semi-physical simulation. RCP allows researchers to focus on abstract aspects such as model building and algorithm design, without concentrating on programming and debugging. The AMT laboratory successfully builds the RCP target computer with the help of the abundant modules provided in Simulink Real-Time. The target computer can be used with FPGA to provide adequate […]
ID: NEWS2022-No.9 Time: November 08, 2022 Place: Harbin, China Event: The AMT laboratory carries out experiments to test the performance of the Maxon EC 69 motor. The experimental results show that when the rotational speed exceeds 4000 r/min, the efficiency of the motor reaches 75%. When the rotational speed is set to be 7000 r/min, the effective output power reaches 191 W, and the input power supply reaches 250 W. The AMT laboratory will further study […]
ID: NEWS2022-No.8 Time: October 26, 2022 Place: Harbin, China Event: The Real-Time control platform based on xPC Target is a semi physical simulation system for Rapid Control Prototyping (RCP), which has been used in AMT laboratory for a long time. NI’s PCI-6229 multi-function data acquisition card has always been an indispensable part of the target computer. We abandon the expensive data acquisition card in the target computer and adopt a low-cost ethernet network card to communicate […]
ID: NEWS2022-No.7 Time: October 20, 2022 Place: Harbin, China Event: As one of the series of Mars UAV prototypes developed by AMT laboratory, MarsBird-VI adopts electromagnetical pitch adjusting method to control the attitude of aircraft. At present, the prototype has been preliminarily developed and the joystick attitude tracking test has been carried out. The experimental results show that the rotor of MarsBird-VI can imitate the acts of joystick to adjust attitude, but there is still a […]
ID: NEWS2022-No.6 Time: September 12, 2022 Place: Harbin, China Event: Appointed by Mr. Yuan Xue, CTO of GDU Technology, Mr. Hairui Wang brought the S400 rotorcraft to carry out the hovering thrust experiment of the rotor in the simulated environment of Mars in Harbin Institute of Technology. The experimental results show that in the low pressure environment of 1350 Pa with the equivalent Martian atmospheric density, the thrust generated by the rotor of the S400 rotorcraft […]
ID: NEWS2022-No.5 Time: September 10, 2022 Place: Harbin, China Event: September 10 is China’s 38th Teacher’s Day, which also coincides with the Chinese traditional festival—Mid-Autumn Festival. AMT laboratory’ students prepared greeting cards, hand-made gifts and short videos in advance to send blessings to the teachers when the festival comes. At noon that day, the teacher and the students ate moon cakes, chatted about life and the future together in Room 208 of the laboratory. The scientific […]
ID: NEWS2022-No.4 Time: August 24, 2022 Place: Harbin, China Event: The 2022 Young Scientist for Powerful Nation visiting activity jointly carried out by China Youth Daily and National Communication Center for Science and Technology, CAST and other relevant units announces the list of winners. After organizational recommendation, expert review and other links, Dr. Quan is nominated as the 2022 Young Scientist for Powerful Nation. News link
ID: NEWS2022-No.2 Time: July 13, 2022 Place: Harbin, China Event: On July 13, Dr. Quan published three signed essays in the AMT laboratory, which were used to guide the team to develop in a more healthy and more orderly direction. The titles of the three signed essays are “读博是怎么回事”, “评价课题进展好坏的标准：高频次单独汇报” and “做事靠谱，需要闭环”. PDF download link: 【20220729】读博是怎么回事 PDF download link: 【20220626】评价课题进展好坏的标准：高频次单独汇报 PDF download link: 【20220317】做事靠谱，需要闭环
ID: NEWS2022-No.1 Time: June 28, 2022 Place: Harbin, China Event: On June 28, Yikang Jin, Ju Liu, Xin Ai, Zhiyuan Kong, Hao Kang, Xinqing Sun, Cheng Cheng, Chuanjie Xu, Shengan Xiong, Qi Wu and Bo Tang, the master students of Aerospace Mechanism Testing Laboratory (AMT), worked hard and managed to pass their thesis defenses. Zhihui Sun, the undergraduate of AMT, passed the thesis defense successfully. AMT held a graduation farewell party for everyone in the “985 […]
ID: NEWS2021-No.10 Time: December 31, 2021 Place: Harbin Event: At 2:00 pm on December 31, the AMT Laboratory held an online year-end party. The party was hosted by Qi Wu, Kaijie Zhu and Yuanxu Wu. The online year-end party only retained the “2021 Photography Contest”. Under the influence of the COVID-19 pandemic, this year’s year-end party is simple, novel and unforgettable. All members of the AMT Laboratory participated in the online voting, and selected outstanding photographs: […]
ID: NEWS2021-No.9 Time: December 21, 2021 Place: Harbin, China Event: AMT publishes a research paper entitled “A multi-arm collaborating robot mechanical system for the small body anchoring and sampling” in the Journal of Harbin Institute of Technology. The article is recommended by the editor-in-chief of the magazine as the cover paper of the issue. To solve the problems of the spacecraft anchoring and sampling on the surface of small bodies which are micro-gravity and unknown […]
ID: NEWS2021-No.8 Time: July 17, 2021 Place: Beijing, China Event: On July 15, at the invitation of the China Academy of Space Technology of China Aerospace Science and Technology Corporation, Dr. Qiquan Quan attends the “Asteroid Attachment and Sampling Institution Program Seminar” held in the Baishiqiao Middle Auditorium, and give a talk to share the asteroid anchoring program ideas and offer advice and suggestions for China’s first asteroid exploration mission. The main content of the […]
ID: NEWS2021-No.7 Time: July 12, 2021 Place: Harbin, China Event: On July 2, Kaixin Wang, Zhiliang Liu, Hongshuai Gao, Wenqing Shen, Qiulin Kang, Kaijie Zhu, Hao Guan, Kaiqiang Zhang, Zhuoqun Cao, Qiuyang Deng, Yixuan Lv and Zhiqing Qiang, the master students of Aerospace Mechanism Testing Laboratory (AMT), worked hard and managed to pass their thesis defenses. Lanchen Kou and Yang Xu, the undergraduates of AMT, passed the thesis defense successfully. Among them, the dissertations of Kaiqiang […]
ID: NEWS2021-No.6 Time: July 12, 2021 Place: Harbin, China Event: On June 16, Qingwei Zhang, Provincial Party Committee Secretary of Heilongjiang province, visits the Research Center of Aerospace Mechanism and Control of Harbin Institute of Technology to inspect the achievements of the laboratory’s participation in the “Chang’e-5” and “Tianwen-1” projects. He fully affirms the laboratory’s continuous scientific research, pioneering and innovation, and active participation in major national scientific research tasks. On behalf of the laboratory, Professor […]
ID: NEWS2021-No.5 Time: June 14, 2021 Place: Harbin, China Event: Invited by South Siberian Scientific Bulletin Editor-in-chief Academician Bukhtiyarov Valery Ivanovich, Dr. Quan serves as an editorial board for the international journal South Siberian Scientific Bulletin. Organize the qualified examination of English-language articles in the journal and help the journal appoint reviewers. The journal’s submission areas involve mechatronics, robotics and intelligent systems. The presence of publications in the journal of this status is a mandatory requirement […]
ID: NEWS2021-No.4 Time: May 9, 2021 Place: Harbin, China Event: On May 7, Harbin Institute of Technology holds the “2021 May Fourth Commendation Conference and Chunhui Innovation Achievement Award Ceremony” with the theme of “Under the Guidance of Chairman Xi’s Congratulatory Letter Spirit” in the auditorium of the main building of the first campus of Harbin Institute of Technology to commend the advanced collectives and individuals that have emerged in the past year. Dr. Quan, who […]
ID: NEWS2021-No.3 Time: May 1, 2021 Place: Harbin, China Event: Dr. Qiquan Quan wins the 23th Heilongjiang Province Youth May Fourth Medal on April 29. The “Heilongjiang Province Youth May Fourth Medal” is one of the highest honors for the youth of Heilongjiang Province. It is awarded once a year to commend a group of outstanding young people who have played the role of a new force and commando in important construction fields, key projects, and […]
ID: NEWS2021-No.2 Time: January 4, 2021 Place: Harbin, China Event: The AMT laboratory obtained funding from the National Natural Science Foundation of China for international (regional) cooperation and exchange projects. The project will be jointly funded by the National Natural Science Foundation of China (NSFC) and the Russian Foundation for Basic Research (RFBR). Project’s title: Physical mechanisms and regularities of ultrasonic drilling of unknown ground (before the landing) of space objects in extreme conditions (Grant No. […]
ID: NEWS2021-No.1 Time: January 4, 2021 Place: Harbin, China Event: On January 4, 2021, Assoc. Prof. Qiquan Quan successfully passed outstanding contribution talents defense for the national major scientific research projects organized by our university, and was promoted to full professor.
ID: NEWS2020-No.5 Time: December 31, 2020 Place: Harbin Event: At 2:00 pm on December 31, the AMT Laboratory held the year-end party in Room K723, TIB. The party is hosted by Tongzhao Wang and Kaijie Zhu. The programs of the year-end party include AMT’s 2020 annual report; personal annual summary report made by students and engineers; a free speaking session by the teachers; a speech delivered by Professor Tang; the “AMT Laboratory Work Summary Report in […]
ID: NEWS2020-No.4 Time: November 11, 2020 Place: Harbin Event: Dr. Tingzhang Wang joins the AMT laboratory. He will be engaged in the research on Asteroid Anchoring & Sampling. Dr. Wang’s homepage is listed as follows. http://www.amthit.org/en/member/tingzhang-wang/
ID: NEWS2020-No.3 Time: July 3, 2020 Place: Harbin Event: Yubao Cao, Wenhe Jiang, Hang Liu, Liyan Liu, Chao Ma, Yilin Shen, Zhiheng Wei and Baohong Sun, the undergraduates of Aerospace Mechanism Testing Laboratory (AMT), worked hard and managed to pass their thesis defenses. Yubao Cao finished his thesis titled “Design and research on automatic docking system for missile loading cartridge” and will join Huawei Technologies Co., Ltd. Wenhe Jiang finished his thesis titled “Design and research of […]
ID: NEWS2020-No.2 Time: June 7, 2020 Place: Harbin Event: On June 7, Harbin Institute of Technology celebrated its 100th birthday, and a grand ceremony was held in the square in front of the main building. After the ceremony, accompanied by Academician Zongquan Deng, chairman of the China Aerospace Science and Technology Corporation Yansheng Wu visited the Research Center for Aerospace Mechanism and Control. The professor in charge of each research direction separately reported their research achievements. […]
ID: NEWS2020-No.1 Time: March 1, 2020 Place: Harbin Event: Invited by IROS 2020 Editor-in-chief Prof. Hong Zhang and Editor Prof. Shugen Ma, Dr. Quan will continue to serve as an associate editor for IROS 2020 and handle the manuscripts in the fields of legged robots and mechanism design. The homepage of IROS 2020: www.iros2020.org October 25-29, 2020 convenes the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) at The Caesars Forum Conventional Center in Las Vegas, […]
ID: NEWS2019-No.12 Time: December 31, 2019 Place: Harbin Event: At 2:30 pm on December 31, the AMT laboratory held the year-end party in the lecture hall of the university’s activity center. The party was hosted by Tongzhao Wang and Yubao Cao. Tongzhao Wang first read the AMT’s 2019 annual report, and then students and engineers made personal annual summaries. Dr. Rui Wu gave the “Three Things in 2019” report, Associate Professor Qiquan Quan made the […]
ID: NEWS2019-No.11 Time: December 29, 2019 Place: Harbin Event: In the morning of December 29, 2019, Dr. He Li, a former graduate, visited our AMT laboratory. Dr. Li is holding a position of assistant professor at Shandong University of Science and Technology. During this visit, he reported to Professor Zongquan Deng, Professor Dewei Tang and Associate Professor Qiquan Quan about his work and life in Qingdao. In addition, he and his schoolmates shared their past […]
ID: NEWS2019-No.10 Time: December 22, 2019 Place: Harbin, China Event: In the afternoon of December 22, 2019, Mr. Defu Zhang, a well-known cultural scholar, came to the Research Center for Aerospace Mechanism and Control for academic exchanges and gave a wonderful lecture on the etiquette of Chinese traditional culture for teachers and students. Mr. Zhang introduced Rongli and morality cultivation in detail, and explained the classics in easy-to-understand language. He hoped to provide a practical […]
ID: NEWS2019-No.9 Time: October 14, 2019 Place: Beijing, China Event: In the afternoon of October 14, 2019, invited by the China Academy of Space Technology (CAST), Professor Zongquan Deng, Academician of Chinese Academy of Engineering, gave the first talk of a series of academic exchanges for the Mechanical Systems Division of the Beijing Institute of Spacecraft System Engineering. Deputy Director Dayi Wang of the Beijing Institute of Spacecraft System Engineering, Director Tao Xiao and Party […]
ID: NEWS2019-No.8 Time: September 25, 2019 Place: Harbin, China Event: Three experts Khmelev, Barsukov, and Golykh from the Center of ultrasonic technologies, Ltd. Altay State Technical University, Russia, visited Research Center for Aerospace Mechanism and Control from September 25th to 28th, 2019. The experts were warmly received by Professor Zongquan Deng, who is an Academician of China Academy of Engineering, and Professor Hong Liu, who is a Vice-President of Harbin Institute of Technology. Dr. Qiquan […]
ID: NEWS2019-No.7 Time: August 19, 2019 Place: Harbin, China Event: AMT laboratory obtained two research funds from National Natural Science Foundation of China in August 2019. The first one is a Key Program titled “Research on Design Theory and Control Technology for Mars Rotorcraft” (Grant No. 51935005), which is in the charge of Prof. Dewei Tang. The second one is a General Program titled “Research on Actuating Mechanism of an Ultrasonic Driller Driven by Dual […]
ID: NEWS2019-No.6 Time: August 19, 2019 Place: Harbin, China Event: Invited by Prof. Zongquan Deng, Prof. Shugen Ma from Ritsumeikan University paid a visit to Research Center for Aerospace Mechanism and Control in August 16 to 19, 2019. Prof. Shugen Ma gave us an academic lecture on “Design and control of environment-adaptive robots” in the afternoon of August 19, which is presided over by Prof. Dewei Tang. The faculty members attending this report include Prof. […]
ID: NEWS2019-No.5 Time: July 06, 2019 Place: Harbin, China Event: Yinchao Wang, Deen Bai, Shuitian Chen, Guoqing Wang, Jiongfeng Hu and Zheng Yang, the undergraduates of Aerospace Mechanism Testing Laboratory (AMT), worked hard and managed to pass their thesis defenses. Yinchao Wang finished his thesis titled “Research on rotary percussive ultrasonic drill driven by single piezoelectric stack” and will join Shenyang Aerospace University, Deen Bai finished his thesis titled “Research on rotary percussive ultrasonic drill with bidirectional drive […]
ID: NEWS2019-No.4 Time: June 5, 2019 Place: Harbin, China Event: Aerospace Mechanism Testing laboratory (AMT) has moved into Technology Innovation Building (TIB) in the Science Park of Harbin Institute of Technology. Prof. Tang works in the K523 and A/Prof. Quan works in the 513-A, the other staff works in the K513-B, and the students in the K513-C and K523. The experiments are conducted in the K211 and K208. AMT hopes that a comfortable environment will […]
ID: NEWS2019-No.3 Time: May 25, 2019 Place: Harbin, China Event: Dr. Xiaodong Wu, who is holding a position of associate professor in Shanghai Jiao Tong University, paid a visit to AMT laboratory of Research Center for Aerospace Mechanism and Control at Harbin Institute of Technology, China and exchanged on the issue of scientific cooperation with Prof. Yingxiang Liu and Dr. Qiquan Quan. He gave a talk on “Intelligent Vehicle Control”, and the students of the […]
ID: NEWS2019-No.2 Time: April 25, 2019 Place: Harbin, China Event: On April 24, 2019, Dr. Qiquan Quan smoothly passed the doctoral supervisor defense organized by Harbin Institute of Technology and became a Ph.D. supervisor in the faculty of Manufacture Engineering of Aerospace Vehicle. This success may accelerate the development of the AMT team.
ID: NEWS2019-No.1 Time: March 1, 2019 Place: Harbin, China Event: Invited by Prof. Shugen Ma, Dr. Quan will serve as an associate editor for the IROS 2019, which will be held in Macau, China. He will handle the manuscripts with the keywords such as Biologically-Inspired Robots, Compliant Joint/Mechanism, and Underactuated Robots. The information about the conference is listed as follows, cited from the official website of the IROS 2019. The 2019 IEEE/RSJ International Conference on Intelligent […]
ID: NEWS2018-No.5 Time: December 30, 2018 Place: Harbin, China Event: At one o’clock in the afternoon, Aerospace Mechanism Testing (AMT) laboratory held the 2018 year-end party on time. Firstly everyone reviewed and summed up his or her achievements in 2018, and talked about his or her plan of 2019. Then Prof. Dewei Tang summarized the achievements of the AMT laboratory in 2018 on behalf of Dr. Quan. Subsequently, the 2018 Photography Contest was held by secret ballot, […]
ID: NEWS2018-No.4 Time: September 4–11, 2018 Place: Oxford, UK Event: The 7th International Meeting on Origami in Science, Mathematics and Education (7OSME) took place in Oxford, the United Kingdom between 5th and 7th September 2018. The meeting was held in conjunction with the Autumn Convention of the British Origami Society, who have just reached their 50-year anniversary this year. Prof. Deng, Dr. Quan, and Dr. Guo went to Oxford to attend this conference. Prof. Sergio Pellegrino from Caltech gave a very impressive […]
ID: NEWS2018-No.3 Time: June 29, 2018 Place: Harbin, China Event: Xin Yang, Tingting Yang and Aimaiti Bulading, the undergraduates of Aerospace Mechanism Testing Laboratory (AMT), worked hard and managed to pass their thesis defenses. Xi Yang finished his thesis titled “Research on transducer driving characteristics of a percussive ultrasonic driller” and will join Midea of China in August 2018, Tingting Yang finished her thesis titled “Analysis of aerodynamic characteristics and experimental study on the trapezoidal blade of Mars […]
ID: NEWS2018-No.2 Time: March 24, 2018 Place: Harbin, China Event: He Li, a member of the AMT, has been awarded the Ph.D. successfully. The title of his dissertation is “Study on characteristics of ultrasonic levitating bearings with the capability of carrying radial and axial loads”. During the period of pursuing the Ph.D., he has published several papers in journals and international conferences, such as Sensors and Actuators A: Physical, Journal of Intelligent Material Systems and […]
ID: NEWS2018-No.1 Time: February 1, 2018 Place: Harbin, China Event: Invited by Prof. Shugen Ma, Dr. Quan will serve as an associate editor for the IROS 2018, which will be held in Madrid, the capital city of Spain. He will handle the manuscripts with the keywords such as Biologically-Inspired Robots, Compliant Joint/Mechanism, Mechanism Design, and Underactuated Robots. The information about the host city is listed as follows, cited from the official website of the IROS […]
ID: NEWS2017-No.9 Time: December 29, 2017 Place: Harbin, China Event: At two o’clock in the afternoon, AMT laboratory held the 2017 year-end party on time. Firstly everyone reviewed and summed up his or her achievements in 2017, and talked about his or her plan of 2018. Then the best photo of the 2017 Photography Contest was elected by secret ballot. After two rounds of competition, Mr. Pengyue Zhao won the best photo award and a bonus of […]
ID: NEWS2017-No.8 Time: December 12 to 18, 2017 Place: Harbin, China Event: Prof. Zdravko Terze and Mr. Viktor Pandza paid a visit to Research Center for Aerospace Mechanism and Control at Harbin Institute of Technology, China and exchanged on the issue of scientific cooperation with Prof. Zongquan Deng and Dr. Qiquan Quan. He gave two talks on “Multibody System Dynamics/time Integration” and “Mechanical System on Lie Group”, respectively. Dr. Quan signed a collaboration research agreement […]
ID: NEWS2017-No.7 Time: December 5 to 8, 2017 Place: Macau, China Event: Mr. Deen Bai paid a visit to attend the 2017 IEEE International Conference on Robotics and Biomimetics (IEEE-ROBIO 2017) at the Hotel of Parisian Macao in Macau, China. The paper—Experimental Investigation on Drilling Efficiency of a Percussive Ultrasonic Drill—has been accepted for oral presentation. Mr. Deen Bai gave an oral presentation regarding his ongoing research. The ROBIO 2017 attracted many researchers around the world […]
ID: NEWS2017-No.6 Time: October 26, 2017 Place: Harbin, China Event: Yuntao Li, a member of the AMT, has been awarded the Ph.D. successfully. The title of his dissertation is “Analysis and experimental study of dynamic characteristics of air rudder transmission mechanism.” During the period of pursuing the Ph.D., he has published several papers in journals and international conferences, such as Advances in Mechanical Engineering, Journal of Mechanical Science and Technology, Journal of Harbin Engineering University. […]
ID: NEWS2017-No.5 Time: September 20, 2017 Place: Harbin, China Event: As an important part of Research Center of Aerospace Mechanism and Control (RCAMC), the Aerospace Mechanism Testing (AMT) laboratory is founded on September 20, 2017. It is a new start. Our research focuses on the testing technologies for various aerospace mechanisms. A new domain “www.amthit.org” which is now being registered will replace the old one “www.rcamc502.org”. Furthermore, a new logo for AMT is designed jointly […]
ID: NEWS2017-No.4 Time: September 6 to 9, 2017 Place: Washington, D.C., USA Event: Dr. Quan, together with Mr. He Li and Mr. Deen Bai, paid a visit to attend the 2017 IEEE International Ultrasonics Symposium (IUS 2017). This international conference took place in Omni Shoreham Hotel, Washington, D.C. The paper—Development of a Rotary-Percussive Ultrasonic Drill for Extraterrestrial Rock Sampling—has been accepted for poster presentation during the IUS 2017. Moreover, another paper—Development of a Novel Noncontact Ultrasonic Bearing Actuated by […]
ID: NEWS2017-No.3 Time: July 2, 2017 Place: Harbin, China Event: Shuitian Chen, Yafei Deng, Yubao Cao, and Wenshi Guo, the undergraduates of RCAMC502, worked hard and managed to pass their thesis defenses. Shuitian Chen and Yubao Cao will pursue their master’s degrees in RCAMC502, and Yafei Deng and Wenshi Guo will study for their master’s degrees at Shanghai Jiao Tong University. Yuxiang Hua and Dan Wang completed their master’s dissertations and successfully passed the defense for master degree. […]
ID: NEWS2017-No.2 Time: March 31, 2017 Place: Harbin, China Event: Yawen Chen and Haimo Xiao visited RCAMC502. They are excellent graduates of Dr. Quan. Yawen Chen graduated from RCAMC502 in July 2015 and received her master of science degree from Imperial College in October 2016. She now is the core team member in XenoDynamics. Yawen Chen made a speech on learning and life experiences in England. Her speech is interesting and broadens our horizon. Haimo Xiao […]
ID: NEWS2017-No.1 Time: February 28, 2017 Place: Harbin, China Event: Dr. Quan is invited to serve as Associate Editor for IROS 2017 (the 2017 IEEE International Conference on Intelligent Robots and Systems). Prof. Shugen Ma is an editor of IROS 2017, who will handle the papers with keywords, Biologically-Inspired Robots, Biomimetics, Climbing Robots, Legged Robots, Nonholonomic Mechanisms and Systems, Passive Walking, Robotics in Construction, Robotics in Hazardous Fields, Search and Rescue Robots. Information for IROS Associate Editors […]
ID: NEWS2016-No.11 Time: December 30, 2016 Place: Harbin, China Event: Mr. Senjing Zheng visited RCAMC502 and made a speech on learning and life experiences in University of Birmingham for all the RCAMC502 members. Mr. Senjing Zheng graduated from RCAMC502 in July 2015 and received the master degree of science from University of Birmingham in December 2016. He decided to pursue his Ph.D. in University of Birmingham. Dr. Qiquan Quan hopes that he can get his Ph.D. successfully and […]
ID: NEWS2016-No.10 Time: December 3 to 7, 2016 Place: Qingdao, China Event: Mr. Junyue Tang, together with Prof. Quan, paid a visit to attend the 2016 IEEE International Conference on Robotics and Biomimetics (ROBIO 2016) and gave a brief presentation about his current research. As the registration chair, Prof. Quan also took responsibility for all registration affairs. During the conference, they had many nice talks with colleagues in robotics and made a group photo with […]
ID: NEWS2016-No.8 Time: September 24 to 29, 2016 Place: Munich, Germany; Toulouse, France Event: Dr. Quan paid a visit to Institute of Robotics and Mechatronics, German Aerospace Cener (DLR), which is located in Munich on 26th September, together with Prof. Zongquan Deng, Prof. Rongqiang Liu, and Dr. Hongwei Guo. Dr. Zhaopeng Chen introduced the ongoing research on robotics to us in detail. After the visit, they attended the European Conference on Spacecraft Structures, Materials and Environmental Testing […]
ID: NEWS2016-No.7 Time: September 17 to 18, 2016 Place: Qingdao, China Event: Invited by Prof. Shugen Ma, Dr. Quan attended the program committee meeting of IEEE International Conference on Robotics and Biomimetics, which was held in the beautiful coastal city, Qingdao. All the accepted papers and the best paper finalists were decided at the meeting. ROBIO 2016 will be open in the near December.
ID: NEWS2016-No.6 Time: August 7 to 10, 2016 Place: Harbin, China Event: The IEEE ICMA 2016 was held in Harbin during August 7 to 10. Mr. Yuntao Li attended this conference and gave a brief report entitled “A Model for Static Contact of Revolute Cylinder Based on Geometric Constraint and Elastic Half-Space Theory”.
ID: NEWS2016-No.3 Time: April 16, 2016 Place: Harbin, China Event: RCAMC502 held a dinner party in Lee’s Restaurant to welcome new members to join our research team. Our new members are Ms. Bo Wang (Secretary), Mr. Haishan Li (Mechanical Engineer), Mr. Shuitian Chen (Junior Student of HIT), and Mr. Yafei Deng (Junior Student of HIT).
ID: NEWS2016-No.2 Time: April 7 to 9, 2016 Place: Wuhu, China Event: Mr. Yuntao Li and Mr. Deen Bai participated in 2016 National Doctoral Academic Forum (NDAF 2016) of Mechatronics Engineering in Wuhu during 7th to 9th April. They had an opportunity to visit Anhui EFORT Intelligent Equipment Co., Ltd.
ID: NEWS2015-No.8 Time: November 16 to 20, 2015 Place: Toronto, Canada Event: Accompanying the professors in our research center, Dr. Quan paid a short visit to Ryerson University at Toronto from Nov. 16 to Nov. 20. They discussed about the joint research of rescue robot control with Prof. Guangjun Liu in Control Systems and Robotics at Ryerson.
ID: NEWS2015-No.7 Time: November 12, 2015 Place: Shanghai, China Event: The 2015 NIDays Conference has been held at Shanghai International Convention Center, Shanghai on November 12th. Mr. Junyue Tang attended this conference and had a discussion with many experienced colleagues about their technical visions. Besides that, he visited an exhibition on online measurement and automation and listened a technical report about Internet of Things (IoT).
ID: NEWS2015-No.6 Time: August 15 to 16, 2015 Place: Harbin, China Event: The twelfth annual conference of deep space exploration was held in Harbin during August 15 to 16. Mr. Junyue Tang attended this conference and gave a brief report about his ongoing research. His paper was honored with “Best Paper Award”. Congratulations to him!
ID: NEWS2015-No.5 Time: July, 2015 Place: Harbin, China Event: Through one year hard working in RCAMC502, Ms. Yawen Chen finished her thesis of “Development of a Starting Torque Test System for Precise Harmonic Drive” and got the bachelor degree successfully. Her thesis was also honored with “Best Paper Award” by HIT. Congratulations to her!
ID: NEWS2015-No.3 Time: June 6 to 11, 2015 Place: Tokyo, Japan Event: Dr. Quan took a visit alone to Tokyo for attending FOOMA2015. Large quantity of food processing machines were exhibited in FOOMA2015. Among these days, Dr. Quan also had a visit to Ma Lab in Kusatsu and climbed the Hieizan mountain near Lake Biwa.
ID: NEWS2015-No.2 Time: April 9 to 12, 2015 Place: Wuhu, China Event: Mr. Junyue Tang gave a presentation at 2015 National Doctoral Academic Forum (NDAF) in Wuhu during 9th to 12th April. By the chance, sponsors arranged many interesting activities, such as local visits to a couple of domestic companies in CHERY, EFORT, etc. We believe it is an enjoyable experience for our Ph.D. candidates.
ID: NEWS2015-No.1 Time: March 12, 2015 Place: RCAMC502, China Event: Dr. Yi Sun, a senior researcher at biomimetic intelligent mechatronics laboratory of Ritsumeikan University, and Mr. Chuanguo Li, the founder of the Cherricube Intelligent Technology Co., Ltd. visited our laboratory and gave us lectures.
ID: NEWS2014-No.4 Time: December 28, 2014 Place: Harbin, China Event: Through one year hard work, every member of RCAMC502 has made considerable progress. To celebrate new year’s coming, RCAMC502 holds a banquet in Hawaii restaurant (Harbin) on December 28th. Best wishes for a wonderful new year!
ID: NEWS2014-No.2 Time: September 14 to 18, 2014 Place: Chicago, USA Event: Dr. Quan gave a presentation at IROS 2014 held in Chicago during 14th to 18th September. Title: A Real-Time Recognition Based Drilling Strategy for Lunar Exploration. Authors: Qiquan Quan, Junyue Tang, et al.
ID: NEWS2014-No.1 Time: July 26 to 31, 2014 Place: Hulun Buir, China Event: Mr. Chongbin Chen gave a presentation at ICIA 2014 held in Hulun Buir during 26th to 31th July. Title: ANFIS-Based Control Strategy for a Drilling and Coring Device in Lunar Exploration. Authors: Chongbin Chen, Qiquan Quan, et al. Mr. Chen received a best paper finalist of this conference.
ID: NEWS2013-No.2 Time: December 12 to 14, 2013 Place: Shenzhen, China Event: Dr. Quan, Mr. Xiaomeng Shi, Mr. Yinchao Wang, Mr. He Li with other laboratory members attended ROBIO 2013 held in Shenzhen during 12th to 14th December. There are four papers published on this conference.
ID: NEWS2013-No.1 Time: August 26 to 28, 2013 Place: Yinchuan, China Event: Mr. Junyue Tang gave a presentation at ICIA 2013 held in Yinchuan during 26th to 28th August. Title: Control System for a Drilling & Coring Device in Lunar Exploration. Authors: Qiquan Quan, Junyue Tang, et al.